Sentence examples for materials addition of from inspiring English sources

The research fields of passive technologies covered the effect of using different insulating materials, construction systems based on sustainable materials, addition of phase change materials in building envelopes and green infrastructures such as green roofs and walls.

In the case of 20 wt.% inorganic/organic epoxy-based materials, addition of synthesized TiO2 nanoparticles into PS-b-PEO- DGEBA/MCDEA) system led to location of the nanoPS-b-PEO- DGEBA/MCDEAk/ePS-b-PEO- DGEBA/MCDEAtween two microPS-b-PEO- DGEBA/MCDEAock-rich phasystem

The influences of fly ash properties, fly ash/recycled glass proportion in the raw materials, addition of fluxing and foaming agent, firing temperature, and residence time at the peak temperature on the final properties (apparent density, compressing strength and leachable potential of major and trace elements) of the foam specimens are investigated.

The foaming behavior and the final properties the foam glass are strongly influenced by properties of fly ash (mainly fluxing temperature and organic C content), fly ash/recycled glass proportion in the raw materials, addition of Na2CO3 fluxing agent and SiC foaming agent, firing temperature, and residence time at the peak temperature.

In the hydrolysis of lignocellulosic materials, addition of xylanases has been shown to significantly improve the performance of cellulases and to increase the cellulose conversion [ 8- 10].

Compared with prehydrolysis and fed-batch strategy using lignocellulosic materials, addition of starch hydrolysates to cellulosic ethanol production is a more suitable method to improve the final ethanol concentration.

While our numbers were insufficient to compare degradation of material, addition of alumina to the zirconia material (ASZ) contributed to a reduction in the transformation rate; however, further reduction of highly cross-linked polyethylene wear was not achieved and our hypothesis was not verified.

The materials with addition of both TiC and ZrC had the highest hardness and coercivity of the materials manufactured.

This critical cooling rate is not a constant for all materials and addition of alloying elements to the steel shift the nose of TTT curve (Figure 4) [102].

In the development of polymer materials, the addition of multi-stimuli-responsive behavior is imperative [1 3], for example, thermo-redox [4], thermo-salt [5], thermo-pH [6 8] among others [9, 10].

Narrowing the gap between theoretical and actual capacity in key Li-based battery systems can be achieved through improvements in both electronic and ionic conductivities of materials, via addition of conductive species.