Sentence examples for material with particle from inspiring English sources
Raw material with particle size above 0.18 was used to avoid the clogging of equipment tubing.
Therefore, for in vivo biomedical applications, magnetic nanoparticles must be made of a non-toxic and non-immunogenic material, with particle sizes small enough to remain in the circulation after injection and to pass through the capillary systems of organs and tissues, avoiding vessel embolism.
A 30×0.32 mm pre-column followed by a 150×0.3 mm column, both reverse phase C18 material with particle size 0.5 µm, were used for separation of the peptides at a flow rate of 7 µL/min in a gradient from 0.1% formic acid in water to 0.1% formic acid in 100% ACN.
The water extract was produced with the use of 1,500 g of dried material with particle size between 2 and 5 mm.
The material with particle sizes between 2 and 5 mm and the weight of 1.66 kg constituted part of pomace devoid of seeds (achenes) and was used for successive production of water and ethanol extracts applied in the present study.
Fine aggregate is considered as a material with particles in a size range from 4.75 mm (No. 4 sieve) to 0.075 mm (No. 200 sieve), commonly up to 80 85 % [35].
The finding "eosinophilic granular material with particles" was no longer visible after the post-exposure period.
Alveolar histiocytosis and free eosinophilic granular material with particles, interpreted as remnants of destroyed macrophages, were found in the lung of almost all animals exposed to 25 mg/m Ceria NM-211 and NM-212.
34 days after the end of exposure, alveolar histiocytosis and eosinophilic granular material with particles were still observed at concentrations of 5 and 25 mg/m Ceria NM-212.
Fourteen different unbound granular materials with particle sizes ranging from 7 mm to 19 mm used in the study.
To study the mechanism of material particle size effects on the electrochemical properties of LiNi0.5Co0.2Mn0.3O2, two kinds of materials with particle size of 300 nm and 1 μm were prepared, based on the electrospinning method and sol-gel method, respectively.
