Sentence examples for material tests with from inspiring English sources

The paper is aimed at investigating the effects of stitching or tufting on displacement and stress fields of sandwiches, whose homogenised mechanical properties are computed through virtual material tests with 3D finite element analysis.

A major limitation of performing standard material tests with UTM, however, consists in the scarce information obtainable with the commonly associated sensors since they provide only global (LVDTs, extensometers, 2D-video analyzers) or local (strain gages) measures of displacement and strain.

The study also compared the material tested with benchmarks from the Third International Mathematics and Science Study, concluding that in math, the skills tested on high school exit exams in the United States are taught in middle school in many other countries.

With a maximum relative error 5%, all the materials tested (with one exception) have a minimal RVE size of 20 or less times as large as the grain size.

The chemical functionality was kept for all the samples obtained by MAPLE and the thermoresponse was demonstrated by the change in the contact angle and thickness values when the temperature was shifted from 37 °C to 24 °C for all the materials tested, with a smaller change for maleimide terminated pNIPAM.

It was also observed that the fibroblasts and keratinocytes showed different sensitivities when exposed to the 24 and 48 hour eluates from the soft liner materials tested, with fibroblasts showing higher percentages of cell necrosis for both extraction periods.

The force displacement curves for all three materials tested with the DHS reached their peak forces at similar mean displacements of 1.48 mm (sd 0.12), 1.2 mm (sd 0.14) and 1.5 mm (sd 0.41) for block A, block B and the femoral heads, respectively.

The test was developed in a material testing laboratory with the same universal testing machine Zwick Roell 300 ™ (Zwick Roell, Ulm, Germany).

Briefly, the left femurs were thawed at room temperature for 1 h and then placed in the material test machine with two support points separated by a distance of 20 mm.

For each material tested, two microplates with identical loadings and layouts were evaluated simultaneously.

Mica substrates of bolometers were irradiated at the Japan Material Testing Reactor (JMTR) with neutron fluence between 1×1022 and 2.2×1023 n/m2.2×1023