Sentence examples for material testing of from inspiring English sources

Pomonis et al. (1999) surveyed structures in the Azores and determined failure loads based in part on material testing of roof timbers.

Since experimental material testing of individual masonry components (e.g., masonry unit and mortar joints) often produces highly variable results, this paper presents a numerical modelling based approach to address the associated uncertainty for the prediction of the maximum compressive load of masonry prisms.

The simulation based investigation of settlement induced damage is completed on the Fort Sumter, SC, where the numerical model is developed through a multi-faceted approach utilizing field investigations including material testing of specimens, three-dimensional laser scanning of fort's geometry, and dynamic measurements of relative movement between adjacent structural components.

Also material tests of the fracture surface were carried out to identify the causes of the collapse.

According to material tests of the lip seal weld joint (316 L/316 L) at room temperature, significant deterioration was not observed.

Material tests of five specimens revealed a shear-strengths variation of 20% and a variation of ultimate shear strain of 27%.

Based on the material test of blocks and binder, the small blocks masonry technique has been successfully applied in the rupture test of Xiluodu arch dam.

The project is accompanied by numerical studies of heat transfer of supercritical water in fuel assemblies and by material tests of candidate cladding alloys, performed by the consortium and supported by additional tests of the Joint Research Centre of the European Commission.

This sample was tested in the TINIUS OLSEN machine of the material testing laboratory of Metallurgy Department of Indian Institute of Technology Roorkee with a loading rate of 50 mm/min.

They were tested on Universal Testing Machine of 500 kN capacity, Ref. Fig. 4 at material testing laboratory of Visvesvaraya National Institute of Technology, Nagpur, India.

Optional stages for micropositioning and material testing allow scanning of a sample under a variety of conditions.