Sentence examples for material susceptibility from inspiring English sources

Defects can occur in welded, brazed, or soldered joints because of improper joint design, improper joint preparation, improper process selection or operation, inherent material susceptibility to cold or hot cracking, or other defects.

Moreover, the plastic strain assessment and strain quantity within individual grains are essential for understanding the material susceptibility to crack initiation and propagation at various loading conditions and temperature ranges.

The goal of product development is to reduce material susceptibility, to establish performance requirements for finishes in building codes and to require consumer-oriented product labeling.

Two major developments are promising: Research and development is under way in the supply industry, with the goal of reduced material susceptibility.

To ensure good indoor air quality, the product development for household use should aim to reduce material susceptibility to contaminants such as mold and should adopt consumer-oriented product labeling.

The data discussed in this paper were taken with a 20× 0.75 NA dry objective (Nikon CFI Plan Apochromat λ series) and a 0.72 NA dry condenser for signal collection in the forward direction, with a resulting spatial resolution for the material susceptibility (full-width at half-maximum of the coherent point-spread function amplitude) of 0.9 (3.5) μm in the lateral (axial) direction.

Computational techniques are therefore being developed in order to provide both a wider understanding of the phenomenon and engineering tools for prediction of materials susceptibility toward hydrogen embrittlement.

These constituents lead to a high-strength, brittle material and susceptibility to hydrogen-induced cracking.

The high tensile residual stresses generated parallel to the grinding direction are likely to affect the material's susceptibility to stress corrosion cracking.

The values for the mass and ferromagnetic material magnetic susceptibility for the sample at 589.25-m depth are higher than those for the other samples.

It is shown that trace impurity elements increase the degradation rate, predominantly in the initial period of the tests, and also increase the material's susceptibility to localized corrosion attack.