Sentence examples for material specimens were from inspiring English sources

The building material specimens were analyzed for compressive strength as per IS code.

Based on a basic formulation, 32 different friction material specimens were produced according to an experimental design.

In order to determine strain rate effects and to draw conclusions about the hydrostatic stress dependency of the material, specimens were tested in compression and tension at strain rates from 10−3 to 104 s−104

In order to characterize and quantify the variations in the microstructure of a five harness satin weave, chemical vapor infiltrated (CVI) SiC/SiC composite material, specimens were serially sectioned and polished to capture images that detailed the fiber tows, matrix, and porosity.

Material specimens were subjected to electrochemical and long-term incubation test with artificial tear fluid (ATF) of various acidities.

Underlying material specimens were prepared using plastic molds drilled with holes 10 ± 0.1 mm in diameter and 1 ± 0.1 mm in depth.

Thus, damage progression is simulated and the strength of material specimens is estimated by employing fracture mechanics within a microstructure that exhibits statistical variability.

The so called High Flux Test Module (HFTM) represents the component of IFMIF International Fusion Irradiation Facilityy) in which material specimens are being placed that accumulate high neutron induced damage rates (≥20 dpa/fpy).

When a material specimen is stressed, it deforms elastically (see elasticity) at first; above a certain deformation, called the elastic limit, deformation becomes permanent.

UCS of similar material specimen are 0.543 1.803 MPa, which can meet the similar criteria.

Initial velocity of CO2 diffusion of No.5 7 coal similar materials specimens is 35 39 mL/s.