Sentence examples for material is installed from inspiring English sources

When the the material is installed, it must be completely sealed.

In the first type of LH antenna, heat resistive material is installed at the antenna mouth only and should be attachable using bolts.

The pressure-receiving surface material is installed at several points in different directions against the case, so it is possible to detect stress from the bedrock or strain in the bedrock applied in any axial direction independently.

Furthermore, a method in which the absorbent material is installed into the back cavity is proposed in order to extend the frequency range of the resonator-type sound absorber.

In this study, the fibrous material was installed so that its upper point protruded above the ground in order to help counteract flood-related problems.

For heavy duty use, like the fire department access ramp in the illustrations, crushed concrete base material was installed over compacted fill to a depth of 8 inches (20.cm), then packed to a 95 percent density using a plate compactor.

Conversely, these values can be calculated from the electric current using a special technique; i.e., two short pipes that are made of different materials are installed in series with electrical isolation.

In a compartment fire, Externally Venting Flames (EVF) may significantly increase the risk of fire spreading to adjacent floors or buildings, especially when combustible insulation materials are installed on the building façade.

Since the late 1990s, a number of pilot-scale field permeable reactive barriers (PRBs) composed of granular Fe(0) and other materials were installed in situ in the reduction of Cr VI) and trichloroethylene (TCE) (Blowes et al.1997; Puls et al. 1999; Puls 1999; Wilkin et al. 2005; Henderson and Demond 2007; Yang et al. 2007; Thiruvenkatachari et al. 2008).

The important feature to include during construction is an underlay, which can be made of a variety of materials and is installed on top of the sheathing along the eaves to keep moisture out.

This strong amplification is caused likely by the completely loose surface material as the station is installed on a talus and not related to any deeper structure of the rock slope.