Sentence examples for material is below from inspiring English sources

On slick surfaces, slow, judicious pressure on the accelerator is recommended because it increases the tires' chances of grabbing onto what little tacky material is below the treads.

From the results obtained can be observed that if the moisture of raw material is below of 4.5 kg of water per kg of dry matter the optimal plant configuration does not change; above this value more investment is needed to extract the extra water content.

Therefore, pulmonary and gastric deposition of the mineral carriers (and active agents) will occur among pesticide application personnel and some proportion of the general population in the vicinity of pest control operations to the extent that particle size of the disseminated material is below the critical 5μm respirable diameter.

The position of stirrer was such that 35% of material was below the stirrer and 65% of material was above the stirrer.

Cross-section C C′ in our model shows that high-velocity anomalies (i.e., relatively cold material) lie at (sim 250 km above the CMB and that low-velocity anomalies (i.e., relatively hot material) are below the high-velocity anomalies immediately above the CMB.

After the 7th week of infection, the lesion thickness in the group treated with the plant material was below the limit of normal thickness.

The nanosilver repository material NM300 K provided by the JRC is well characterized, monodispersed, highly concentrated (10%% w/w) with more than 90%% of the material being below 20 nm in size (maxima 10 15 nm).

The limit of column improvement by virtue of the B term when using solid core materials is below the optimal linear velocity, i.e., low flow rates, as improvements are theoretically negligible at, or above, this optimal linear velocity (Hayes et al. 2014).

Consequently, the Au content in the template-stripped films of these materials is below the sensitivity of the XPS, 0.1 atom %.

However, one difficulty for the applications is that the Curie temperatures (Tc) of most DMSs materials are below the room temperature.

This paper presents a two-dimensional analysis of surface waves possibly emerging in a specific open channel flow with continuous solidification, i.e. the fluid consisting of molten material is cooled from below and solidifies.