Sentence examples for material input data from inspiring English sources

If fibre bridging was detected within the composite's failure surface, it could be quantitatively considered in the material input data for numerical simulations.

The FEM simulations in the field of design and safety assessment represent very powerful tools, but they are strongly limited by available material models and material input data.

From these results some of the essential material input data for forming simulations such as viscosity, shear modulus, and locking angle can be derived.

Since the mechanical properties of structural steel are important material input data in engineering design as well as in both static and dynamic analyses of structure, the important task is to deeply understand the mechanical properties of structural steel and the effecting factors on these properties, in which the strain rate effect is most important.

For each material, the input data required for the prediction scheme were computed from modal theory and then contaminated by random error.

Using a specific plasticity function g= g ξ2),ξ2="|∇u|2 that corresponds to wide class of materials, namely power-hardening engineering materials as input data, the problem is solved numerically.

The simulation program presents temperature distributions of a receiver and molten salt with the use of heat flux distribution of solar radiation and properties of composing materials as input data.

However, such tools still have much room for improvement: manual input of thermal properties of a building material; input of incorrect data; and semantic conflicts between building designers and engineers.

This chapter presents an overview of the fundamentals, the required material and construction input data, the required exterior and interior environmental loading, and the description of the output results from the heat and moisture transfer models.

The non-linear behavior of the PP material was modeled using an elastic-plastic material model for which input data were obtained from uniaxial tension tests.

For simulation purposes, the intrinsic conversion efficiency (ηc), the total number of optical photons produced per incident X-ray (m0), the attenuation coefficients and other optical parameters of the scintillator materials, were taken as input data.