Sentence examples for material in the model from inspiring English sources

The property of formation material in the model is isotropic and homogeneous.

Excavation of the remaining material in the model revealed that the MnO2 distribution throughout the model was consistent with that observed in the cores.

It is possible to change the description of filter material in the model to either a traditional sand filter or a filter of crushed concrete, and thereby demonstrate the P-retention efficiency of the different materials.

The properties of applied material in the modeling are: E c  = 22.75 GPa, (v = 0.2) and (rho = 25;{text{kN}}/{text{m}}^{3}.) For nonlinear analysis, the tensile strength of concrete is taken to be 3.36 MPa which is about 12% of its compressive strength.

The aim of this paper is to present the evolution of plug flow developing in three densely packed granular materials in the model of a hopper made of Plexiglas.

These examples indicate that the level set method can successfully identify zonation structures, even if the number of materials in the model domain is not exactly known in advance.

The material properties for each material used in the model are defined in Table 4.

Related experiments are designed and achieved on a high rate test machine to determine the material parameters in the model.

A modified bilinear fracture model was established for asphalt mastic and the material parameters in the model were determined from laboratory tests.

In addition, only a minimal amount of straight-forward experimental characterization is required to determine the necessary material parameters in the model.

The BMP model does not contain fitting parameters and every material constant in the model can be estimated from independent rheological measurements.