Sentence examples for material deposition angle from inspiring English sources

Through the use of different PSs array and the control of the material deposition angle (i.e., θ and φ), hollow spheres with windows of total size from 0%to50%0% and number from 1 to 6 are achieved.

Hence the procedure usually used for films deposited at normal deposition angle [61] cannot be applied to oblique angle or glancing angle deposited films.

an isotropic Co layer deposited at normal incidence (deposition angle 0°).

Where θ is the deposition angle, which is defined as the material vapor beam with respect to the substrate normal, and Φ is the azimuth angle with respect to the PS array monolayer.

Geometrical parameters such as the radius, length, and shape of the micromotors can be varied, on the one hand by changing the pattern dimensions that are used for the deposition of nanomembranes on the substrate and on the other hand by the deposition angle, rate, and thickness of the material.

The deposition angle, rate of substrate rotation and solid material are the effective factors which control morphology, roughness, symmetry and porosity of structures.

The Ag NRA was obliquely deposited by electron beam evaporation at a deposition angle of 89°.

Figure 5a shows the material deposition schematic on the edge of PS array (the blue spheres), where 30° is the value of azimuthal angle of PS array, i.e., the angle of material vapor beam related to the reference line.

The deposition angle was fixed at 75°, and a deposition rate of 2.5 s−1 was chosen.

Therefore, the deposition angle could be controlled from 0° (normal deposition) to 90°.

SPD offers wide choices in choosing precursors and deposition temperature for desired material deposition [29].