Sentence examples for mass spectrometer settings from inspiring English sources

Next, 300 fmol of the sample was analyzed by nano-LC coupled to a quadrupole-time-of-flight (Q-TOF) mass spectrometer (settings as described below).

No major changes (different mass spectrometer settings etc).

Autosampler and mass spectrometer settings are given in Supporting Information.

The program also offers to save all algorithm and mass spectrometer settings.

The mass spectrometer settings were as follows: mass spectra registered in a positive ion mode, capillary voltage of −4,500 V and the temperature of the heated capillary was 280 °C.

The mass spectrometer settings in this case were as follows: LIFT TOF/TOF mode, 51) positive voltage polarity, sample rate 0.5 GS/s, reflector detector voltage 1.849 kV, ion source voltage "1" 8 kV; ion source voltage "2", 7.2 kV; LIFT voltage "1", 19 kV; LIFT voltage "2", 3 kV; reflector voltage "1" 29.5 kV, reflector voltage "2" 13.8 kV.

The mass spectrometer's settings were, full MS scan range 350 to 1500 m/z, with mass resolution of 60,000 at 400 m/z, 50 μs scan time with accumulation of three microscans.

Mass spectrometer parameter settings were gas temperature (350°C), gas flow (10 L·minebulizerulizer (30 psi), sheath gas temperature (400°C), sheath gas flow (11 L·min−1), capillary voltage (3800 V) and nozzle voltage (500 V).

The mass spectrometer was set for ESI in positive mode.

In resource-rich settings, mass spectrometer is also used for quantification of the pill ingredients.

The AGC settings for the mass spectrometers were set as follows: 3 × 10 for the ion trap and 1 × 10 for the Orbitrap.