Sentence examples for mass fraction parameter from inspiring English sources

Furthermore, a standard deviation analysis has been conducted on the BMF (Burned Mass Fraction) parameter to understand if the different characteristics of gasolines could give advantages in terms of reduction of the CCV (Cyclic Combustion Variability).

Instead of test to production conditions correlations, which are demonstrated from the Goodwyn field case study to be dependent on the degree of reservoir pressure depletion and gas cycling, the intermediate separator independent C5+ mass fraction parameter is developed, from which train dependent liquid yield can be mapped.

The dispersion of nHA microaggregates in the polymer matrix were imaged by microcomputed X-ray tomography, allowing a study of the effect of the nHA mass fraction and process parameters on the inorganic phase dispersion, and ultimately the optimization of the preparation method.

How the composite scaffold's geometry and mechanical properties change with the nHA mass fraction and the process parameters were assessed.

Four training sets of pharmaceutical tablets were compressed with microcrystalline cellulose (MCC) excipient and indomethacin API by varying either the porosity, height, and API mass fraction or all three tablet parameters.

Results show that the mass flow rates of working fluid and solar collector subcycle and also ammonia mass fraction are important system operation parameters that should be optimized to deduce the irreversible behavior of the solar system for producing more useful energy.

In the model, inlet pressure (Pi), conical valve angle, length to diameter ratio (L/D) and cold mass fraction (yc) are used as input parameters while total temperature difference (ΔT) is chosen as the output parameter.

Quantitative correlations between the conductivity and structural parameters find the RCP measurements to be sensitive to CNT mass fraction, spatial organization and, therefore, the processing parameters.

Under this condition, minimum spouting velocity, bed pressure drop, hold-up of solid particles within a draft tube, gas flow rate through the annulus and solids circulation rate were determined by changing the total gas flow rate and the mass fraction of finer particles as operating parameters, and by changing the height of the entrainment zone and the draft tube diameter as geometric parameters.

The system operating parameters such as mass fraction, pressure and temperature are varied to investigate their effects on the energy and exergy efficiencies of the with/without heat recovery and integrated system, rate of hydrogen production, and rate of oxygen production.

In this study, high strength PVDF membranes with cellular pore structure are successfully prepared by comprehensively regulating the process parameters such as the dissolution temperature (Td), vapor temperature (Tv) and exposure time (t) during the VIPS process, as well as the membrane-forming parameter i.e. mass fraction of PVDF polymer.