Sentence examples for mass flux through from inspiring English sources

The heat flux imposed on the surface of the fuel rods and the mass flux through the subchannels determines the coolant outlet temperatures.

The diffusion model is verified by calculating the total mass flux through a nanopore by combination of slip flow and Knudsen diffusion and compared with experimental data.

For each model, equations are derived for the solvent mass flux through the membrane and for the mass fraction distribution of solvent inside the membrane.

It is shown that, for a given mass flux through a discontinuity, its type depends only on the relation between inclination angles of a magnetic field.

A novel dual micro-channel array evaporator is adopted, which reduces both the mass flux through each micro-channel, as well as the channel length, thus reducing the pressure drop.

The consistently high erosion rates on either side of the orogen near 34°S imply that climate plays a secondary role in the mass flux through an orogenic wedge where the perturbation to base level is similar on both sides.

Stream-wise pressure distributions and mass fluxes through micro-channels given by the IP method agree well with experimental data measured in long micro-channels by Pong et al. (with a height to length ratio of 1.2 3000), Shih et al. (1.2 4800), Arkilic et al. and Arkilic (1.3 7500), respectively.

In this work, we performed a 3D numerical simulation of mass transport of methanol in the DMFC anode under open-circuit conditions and obtained the mass flux of methanol through the porous layer for different values of permeability.

In particular, the source mass flux can be estimated through tephra sampling during an eruption (e.g. Bonadonna et al. 2011), measurements of ground deformation (e.g. Kozono et al. 2013) and satellite observations of the growth of umbrella clouds (e.g. Pouget et al. 2013).

This model is a transient model, coupling 3D thermal model with a 2D hydrodynamic one through the mass flux of evaporation condensation, which occurs in a mass conservation equation.

The porous membranes such as polypropylene (PP) and polyvinylidene fluoride (PVDF) materials had high mass flux, easily allowing water permeation through the membranes, which was not desirable to recover the product with high butanol titer [ 17, 18].