Sentence examples for mass flux between from inspiring English sources
This latter situation indicates a non-balanced mass flux between processes in channels and on hillslopes.
The pressure drop was determined under steam mass flux between 130 and 340 kg m−2 s−1 accompanied with various cooling water volume flow rate ranging from 20 to 40 L h−1.
This study differs from the commonly used averaged approximation (AA) method that treats the mass flux between the aquifer and aquitard as an averaged volumetric source/sink term in the governing equation of transport in the aquifer.
Microbial degradation activity at the site was indicated by an increase in dissolved iron mass flux and a reduction in sulphate mass flux between the two investigated control planes.
The mass flux between the surface of the material and air depends on the mass transfer coefficient (hm) through the boundary layer, the gas phase concentration of the target compound immediately adjacent to the material (y0), and the gas-phase concentration in bulk air (y(t)).
Detailed information of the liquid and gas flow pattern is provided to the zone model by the hydrodynamic model, while the hydrodynamic model gets its required information about local mean bubble sizes and the local mass flux between gas and liquid from the zone model.
Experiments were performed for mass fluxes between 100 and 600 kg/m2 s and for heat fluxes between 5 and 30 kW/m2.
The key idea is to phrase remap as a global inequality-constrained optimization problem for mass fluxes between neighboring cells.
Based on the quantified changes in total contaminant mass fluxes between the control planes, first-order natural attenuation rate constants could be estimated.
Using the ACASA model to predict energy and mass fluxes between the vegetation and atmosphere appears promising in this context, and it could significantly improve our ability to estimate fluxes for use in future studies.
Local bubble sizes and total mass fluxes between the gas and liquid phase are fed back from the simplified reactor model into the detailed hydrodynamics until convergence between the two models is obtained.
