Sentence examples for mass flowrate of from inspiring English sources
The mass flowrate of particles (ton/h), entering the froth by true flotation, was evaluated from direct measurement of bubble load (ton/m3) and gas flowrate (m3/h).
The mass flowrate of the intermediate hot water stream determines the amount of waste heat recovered and the final hot water temperature affects the thermal efficiency of ORC.
The long pulse duration results in an increase of the duration of the pulse-jet and has no influence on the maximum mass flowrate of the pulse-jet.
First, the process is mathematically formulated into a nonlinear multi-input-multi-output (MIMO) gas-phase system in which the injection mass flowrate and the outlet purging mass flowrate of CO2 gas act as control inputs.
At the end of the simulation, the scale-up procedure gives the size distribution, the volumetric flowrate and the mass flowrate of all the streams in the circuit, and the mill power draw.
At the lowest starting xylose concentration and an oxygen mass flowrate of 4.2 mgO2/s, volumetric productivity and xylitol yield reached maximum values (Qp=0.70 gP/l h and YP/S=0.73 gP/gS, respectively), but xylitol concentration was quite low (35.9 gP/l).
The proposed methodology uses Aspen Energy Analyzer AEAA) to determine the mass flowrates of the bleeding streams while generating alternative designs that can potentially reduce the water consumption by reducing the total cooling requirement.
This paper proposes a 1-D thermodynamic model for determining the critical pressure ratio, the mixing efficiency and all the dimensions of an optimum ejector providing the highest possible compression ratio for fixed inlet conditions and mass flowrates of the motive and suction fluids.
Therefore, it is recommended to place the longitudinal direction of the heat exchanger on the normal position of the inclination plane and work at a high mass flowrate to weaken the inclination effect.
Moreover, the most efficient approach of controlling the outlet intake air temperature in the heat exchanger is by adjusting exhaust mass flowrate instead of intake mass flowrate.
A breakdown of the cost elements involved in the transportation chain of CO2 is conducted, and the influence of the mass flowrate and the length of the pipeline on the process economics is examined.
