Sentence examples for mass flow ratios from inspiring English sources

Mass flow ratios of the downward flow and the upward flow were 0.00, 0.05, 0.1 and 0.15.

The behaviour of liquid film carrying nano-particles in the discharge passage is studied using different Gas to Liquid mass flow Ratios (GLR), ranging from 0.08% to 1.25%.

Vapor and liquid pressure drop constraint along with ammonia and water mass flow ratios defined the internal geometrical sizes of the column, such as the column diameter and height, as well as other designing parameters.

Interfacial two-phase flow structures, local and area-averaged Nusselt numbers (Nu), f coefficients, channel-wise averaged void fractions and thermal performance factors (TPF) for three sets of horizontal and vertical U-bend channels of AR = 1, 0.83 and 0.33 are measured with liquid Reynolds numbers (ReL) and air-to-water mass flow ratios (AW) in the range of 1500 ≤ Re ≤ 10000 and 0 ≤ AW≤0.024.

Recovery efficiencies varying with mass flow ratio between air and solution are analyzed and the optimal flow ratio is obtained.

Performances such as mass flow ratio, pressure ratio and efficiency are compared at three types of working condition.

The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects.

PIV data shows the effect of mass flow ratio on the velocity distribution inside the chimney model.

So that gas to melt mass flow ratio was increased for the same protrusion length and this ratio increase caused the finer powder particle size.

These are the number of pressure levels, the pressures, the mass flow ratio, and the inlet temperatures to the HRSG sections.

The results show that the atomizing gas-to-liquid mass flow ratio (GLR) does play a key role on the flow behaviour inside the atomizer.