Sentence examples for masking structure from inspiring English sources

SAIL works by encoring multiple patterns and alignment into thickness modulations of a monolithic masking structure.

Then, the iterative joint multilateral filtering (IJMF) suggested in [17] achieves the best unsharp masking structure through the training of parameters.

Based on our simulated vacancy maps we concluded that the minimum width of the masking structure should be at least 5 µm to avoid the effects of lateral isolation for the given implantation conditions.

Elongated masking structures were designed and manufactured on silicon substrates to modify locally the precursor impinging rate of one of both precursors to study the nature of this obviating behavior.

In the previous studies [12 15], such oxidation layer was believed to be the only mask structure on the scratch area.

To avoid the harmful excitation of resonance modes in this mask structure, a microwave absorber was built into it.

The Γ-shaped mask structure can be realized with a low cost patternable sol gel and photolithography processes.

The proposed Γ-shaped mask structure provides passive matrix OLED devices with a higher aperture ratio than the conventional T-shaped profiled masks.

Full angle deposition can be realized with the new mask structure, which is important for mass production of devices with automatic systems.

Cu thickness ranging from 5 to 10 μm is grown in a resist mask structure that deposits the topography of TSVs and wiring patterns on top of the silicon, as shown in Fig. 7 [17].

Since an EUV resist model has not been developed yet, optimising the image of the intensity profile is applied here as an alternative for using the optical proximity correction to tailor a phase mask structure.