Sentence examples for making electrical contacts from inspiring English sources

The cross-sectional shape of the weaving guide structure was made to be rectangular, and arrays of cylinder poles of 5, 10 and 20 μm in diameters were arranged as supporting structures for making electrical contacts with the bottom of the weaving guide structure.

When a magnetic field is applied along the length of the blades, opposite magnetic poles are induced in the overlapping parts, and they are attracted together, making electrical contact.

The microfabrication process does not require extra etching step for eventual residual layer, thus making electrical contact between the fluid in the channel and electrodes on the upper and lower slices.

The contact points, interconnecting the woven fibers are designed to be fixed with respect to each other where they can make electrical contacts as necessary.

This is mainly due to the need to make electrical contacts with the ends of the nanotube, which suppresses the measured conductivity, and is further complicated by inter-tube contacts.

To fabricate such a solar cell, methods are required (1) to prepare large area arrays of vertically aligned core-shell nanowires; (2) to make electrical junctions to such wire arrays; and (3) to make electrical contacts to the backsides of these devices.

This paper presents the results of a further effort that uses these interconnects to make electrical contacts to a thin-film polysilicon resistor so as to evaluate its ignition capability and its use as a wall temperature sensor for the micro-gas turbine engine.

It alloys with many metals and can make electrical contacts to organic materials.

(v) It expands when frozen by ∼3.2 vol %. (vi) It can supercool far below its melting point (mp 30 °C). (vii) It alloys with many metals and can make electrical contacts to organic materials.

The electroanalytical methods use electrically conductive probes, called electrodes, to make electrical contact with the analyte solution.

Holes are etched through this layer in certain locations to make electrical contact with the integrated circuitry.