Sentence examples for make the beam from inspiring English sources

Bawendi has since fashioned this cascade of light into a laser and has started to tweak the dots to make the beam more efficient.

It is found that the unstable spinning speed region can be decreased by increasing the moments of inertia, pretwisted angle or elastic constraints, while the axial compressive load and spinning speed make the beam system become weaker.

Conventional beam characterization systems that use photographs of the reflected beam on a tower-mounted target are typically not large enough to capture the beam at long distances, and the magnitude of the irradiance for long-distance heliostats is quite low (only a fraction of a sun), which can make the beam image difficult to discern from the ambient lighting on the target.

The magnets make the beam wiggle and produce some x-rays.

"The objective was to make the beam smaller while increasing the current," says Kazunori Akai, a KEK physicist.

As a result, we can make the beam of user k not to yield interference to all users in Ψ k,N by determining the beam weight as begin{array}rcl@ {bar{mathbf{w}}_{k}} = frac{{mathbf{w}_{k}^{text{MRT}} + Delta {mathbf{w}_{k}}}}{{left| {mathbf{w}_{k}^{text{MRT}} + Delta {mathbf{w}_{k}}} right|}} end{array} (8).

While the overall resistance factor applied to column strength does make the beam-column design simpler, the slightly more complex partial resistance factor approach presented could lead to more efficient designs.

The smoke particles act as tiny scatterers that spray the laser light and make the beams visible.

Then, using flashlights covered with red filters to make the beams less conspicuous, they rifled through two trash cans outside Chung's gate.

Furthermore, the optimal contents of SF in SFRRAC beams with 100% recycled aggregates (RA) to make the beams equivalent to NAC beams, in terms of moment carrying capacity are estimated using a proposed inverse analysis.

Laser photons then zip through, stimulating cascades of offspring, making the beam much stronger, such amplification happening over and over.