Sentence examples for maintain tensile from inspiring English sources

In the lung, ECMs maintain tensile strength, elasticity, and dictate the specialized function of multiple cell lineages.

To maintain tensile ductility in lightweight ECC, considerations should be given to the effects of lightweight particles on the fiber, matrix, and fiber/matrix interface.

By combining synthetic biodegradable polymers, Ramakrishna was able to increase the porosity of polycaprolactone/hyaluronic acid/gelatin to over 93%% and maintain tensile strength to support osteoblast for mineralization [61].

The main feature of SHCC is the formation of multiple fine cracks and increased or maintained tensile resistance upon increased deformation whilst more cracks appear.

While the compressive integrity is still maintained, tensile failure and instability occur when the mud pressure declines below the lower limit.

From the tensile test, it was confirmed that the Al 21Ti 23Cr coating enabled Ti 48Al to maintain its tensile properties regardless of exposure to oxidizing atmosphere.

Spinal flexion induces three-dimensional (3D) deformations, requiring the FCL to maintain significant tensile and shear loads.

The mix design of a preliminary version of EGC was optimized to achieve higher compressive strength, maintain high tensile ductility, and enhance the material greenness simultaneously.

It implies that with sufficient bridging provided by fibers, UHDCC can maintain the tensile ductility at an amazing level, despite the high fracture toughness of matrix.

Surface porous polyether-ether-ketone has the ability to maintain the tensile monotonic and cyclic strength necessary for many load bearing orthopedic applications while providing a surface that facilitates bone ingrowth; however, the relevant deformation behavior of the pore architecture in response to various loading conditions is not yet fully characterized or understood.

Specimens containing both 2% lime and 6% SBS, have the highest stiffness modulus which is 2.3 times higher than those of the control mixture and showed the least reduction in tensile strength ratio while maintaining 0.70 tensile strength ratio after seven freeze thaw cycle.