Sentence examples for main used parameters from inspiring English sources

In Table1, the main used parameters are reported.

Criteria of assembling reads into transcripts were defined as described in the main text, using parameters (L, C, c) = (50-350,10,5) for 454 and (L, C, c) = (50,5,2) for Illumina/Solexa data.

Table 1 Main parameters used on the simulation Parameters Values Frequency Operation 3.5 GHz Frequency band 5 MHz Sampling factor 144/125 Antenna height (SS) 1.5 m Antenna height (BS) 60 m Transmit antenna gain 1 Received antenna gain 1 System loss factor 1 Frame duration 20 ms Cyclic prefix 0.25 Simulation time 100 s.

Table 1 Main Parameters used in the system simulation Parameter Value The cell area for simulations 500 × 500 m Maximum transmit power of D2D transmitters −10 dBm Noise figure of D2D device 9 dBm Sub-carrier bandwidth 15 kHz Noise spectral density −174 dBm/Hz Path loss exponent 3.7.

Figure 1 shows the coordinate system and bistatic airborne radar parameters, and the main parameters used in this article are listed in Table 1.

Table 1 shows the main parameters used in the simulation.

Table 1 summarizes the main parameters used in the simulation.

The main parameters used in the model are given in Table 1.

Section 5 defines the network scenario and the main parameters used in the simulation.

The modal results, specifically modal periods, are the main parameters used in time history analyses.

The main parameters used in simulation are listed in Table 1.