Sentence examples for main shearing from inspiring English sources
It also means, and confirms, that individual pile failures rather than block failures are the main shearing mechanism that takes place underneath the systems during soil plasticization [5].
These two main shear zones will be discussed further below.
The test specimen collapsed as a result of the main shear crack at a load of 138.76 kN in the right shear span and reaching the topping concrete.
On the other hand, DENP specimens suffer from indirect tensile cracks near the main shear crack, as shown in Fig. 5d.
Their structural behavior was observed and reported in terms of failure mechanisms, crack patterns, main shear cracks, and ultimate capacities.
Due to the lack of a main shear deformation direction, the SSD on the (111)[−12-1] direction (Fig. 6f) is shallow and wide.
Prior to reaching the main shear plane (MSP), many ELS boundaries are nearly perpendicular to the MSP.
This fact is a direct consequence that the angle of inclination of the main shear crack diminishes as the haunched angle increases.
Two main shear cracks became at the load of 168.0 kN in left shear span the plates numbered 3 and 6 passed and passed under the plates plates numbered 4 and 5.
Finite element analysis show the introduced STS structure twists the stress field distribution and then hampers the main shear band propagation and promotes the formation of multiple shear bands, which improve the tensile plasticity.
It is used for the determination of the temperature rise distribution in the chip and the work material near the shear plane caused by the main shear plane heat source in orthogonal machining of a continuous chip.
