Sentence examples for main pore size from inspiring English sources

Furthermore, as shown in the inset of Figure 2, the main pore size distribution is about 3.6 nm, which is good consistent with TEM observation.

The specific surface area of porous transparent bulk TiO2 was 197 m2/g, and the main pore size was located around 1.3 nm.

In this present study, several CCLs with controlled microstructure, including main pore size, pore volume and porosity ranging from 30 to 70 nm, 0.443 to 0.962 cm3/gPt/C, and 45.4 to 64.4%, respectively, were prepared by changing the hot-pressing pressure in a decal process, and their water management ability and cell performance were evaluated.

The porous carbon carbonized at 650 °C contains abundant micro/mesopores and possesses the high BET surface area of 788 m2 g−1 and the main pore size of 1.1 2.5 nm, which can boost the adsorption of sulfur and polysulphides by melt-diffusion technology.

Main structural parameters (pore size, layer thickness, morphology and nanograins size) and composition of PSi were investigated by means of X-Ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy.

Three-dimensional reconstruction enabled the main architectural parameters such as pore size, interconnecting porosity, level of anisotropy and level of structural disorder to be determined.

Regarding the metal rejection yields the main relevant factors were the membrane pore size with a negative effect, followed by the surfactant concentration with a positive effect.

The main strategy is to estimate a representative pore size for a porous medium to calculate the Knudsen number.

The as-prepared NiO microspheres are composed of loosely packed nanoparticles with diameters around 30 80 nm, and have a main pore distribution from 3 to 20 nm with a mean pore size of 5.7 nm.

Specific surface area, pore diameter, pore volume, and pore structure (pore size distribution) were considered as the main geometrical factors which were controlled by tuning such sol-gel parameters in silica synthesis as Reynolds (Re) and Froude (Fr) dimensionless numbers as well as acid dripping time, and acid normality (N).

One of the main advantages of this type of synthesis is the pore size of these aerogel products exceeds that of MOFs, allowing them to interact with larger molecules leading to many new applications.