Sentence examples for main dimensions are from inspiring English sources

The design space for agent-oriented captology is defined and several of its main dimensions are elaborated upon.

It is well known that while ship weight and the ratios of main dimensions are the primary factors on ship motions, other hull form parameters (CP, CWP, CVP, etc).

The FGT tubes main dimensions are ( {t}_1=1 ) mm, ( {t}_2=3 ) mm, die geometry ( r=4 ) mm, and coefficient of friction ( {mu}_{mathrm{d}}=0.03 ). Figure 15 shows significant effect of exponent gradient m on the DAF for both UT and FGT tubes.

Although various classifications of spatial skills have been proposed, a separation into two main dimensions is usually accepted: visualization (e.g. mental rotation, paper folding) and navigation (e.g. map orientation).

Three main dimensions were proposed: counterbalancing a cognitive deficit by increased time or effort, use of latent skills or acquisition of new skills.

The relative contribution of the four main dimensions was 31% for Attitudes and Traits, 30% for Beliefs and Values, 22% for Expertise, and 17% for Teaching Ability.

The main design considerations after the selection of the main structural dimensions are motion accelerations; impact loading due to waves and landing; fatigue of highly stressed areas; and stresses induced by vibration.

The main metadata dimensions are each described below and summarized in Table 1 at the end of Sect.

In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints.

Concluding this section, main shaft dimensions are 11.8 mm in external diameter and 186.6 mm in length between the end of the rotating knob and the axis of the two arms, whose dimensions are of 99.4 × 5.5 × 8.0 mm, while the graspers and relative holding frames are 47.5 × 5.5 × 5.5 mm.

The cross-sectional dimensions of the deck which is a box girder with five rooms are 31.0 cm in width and 7.0 cm in height, and for the pylon, the main cross-sectional dimensions are 8.0 cm in width and 5.0 cm in thickness.