Your English writing platform
Discover LudwigSuggestions(1)
Exact(1)
The flame retardant and mechanical properties of polypropylene (PP) composites filled with microencapsulated red phosphorus (MRP) and magnesium hydrate (Mg(OH 2)/aluminum hydrate (Al(OH 3) were measured.
Similar(59)
Rapid strength development associated with accelerated dissolution and hydration involving magnesium silicate hydrate (M-S-H) formation was observed at early ages under elevated temperatures (60 °C).
The pores of the soils had been filled by newly formed crystalline compounds known as magnesium silicate hydrate (M-S-H) and magnesium aluminate hydrate (M-A-H) for the bentonite and kaolin, respectively.
The MgOs have detrimental impact on the properties of TW-cured-CM, due to the formation magnesium silicate hydrate with lower binding capacity compared to calcium silicate hydrate.
Different chemical reactions may concurrently occur between MgCl2 and cementitious constituents to form brucite, Friedel's salts, magnesium silicate hydrate, magnesium oxychloride, and/or secondary calcium oxychloride.
This paper discusses the optimization of magnesium silicate hydrate (M-S-H) binder systems for cement paste and mortar.
Here, based on silk sericin, we design a series of nanoclay lithium magnesium silicate hydrate (LMSH) cross-linked semi-IPN sericin/poly NIPAm/LMSH) (HSP) nanocomposite hydrogels and demonstrate advantages in serving as antibacterial wound dressing in comparison with gauze.
Fibres derived from waste chicken feathers have been used to reinforce magnesium silicate hydrate (M-S-H) cement mortars and Portland cement mortars using up to 5% of fibres by weight of dry binder.
A chemical reaction occurs for both the CCSC and OPC paste exposed to MgCl2: for the CCSC paste, this appears non-deleterious since relatively no reduction in dynamic elastic modulus is observed; for OPC paste, however, this is a damaging reaction due to formations of magnesium silicate hydrate and calcium/magnesium oxychloride.
The experimental findings show that the use of this high Mg/PO4 molar ratio suppresses the formation of potassium-free magnesium phosphate hydrates.
Based on the thermodynamic calculations and the experimental results, the final products tended to be M S H gels (magnesium silicate hydrates) rather than Mg(OH 2, and the Mg/Si ratio of M S H gels was in the range of 0.67 1.00.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com