Sentence examples for machining tolerance from inspiring English sources

The machining tolerance is about 3.4 nm and the surface roughness is lower than 8.0 nm.

Surface errors of the increased mirrors cannot be ignored due to the machining tolerance.

The mixture with 20% O2 in SF6 is revealed to be an optimum condition for machining tolerance and quality.

The result shows that the machining tolerance between -0.1 μm and +0.6 μm and aspect ratio with 17.5 are obtained.

For a range of well documented reasons, low-cost industrial robot-based machine tools are limited in terms of machining tolerance range.

Micro machining plays an important role in manufacturing the miniature products which are made of various materials with complex 3D shapes and tight machining tolerance.

The new tester overcomes the sensitivity of earlier designs to small variations in the dimensions of specimen holders, or specimen positioning inserts, consequent upon machining tolerances.

The aim of this paper is to analyse the influence of the controller IKM on PKM machining behaviour and to quantify its incidence on the assembly and machining tolerances of structural elements.

A seal geometry equipped with a self-pressurized balancing chamber was designed to make leakage as insensitive as possible to the supply pressure and to the barrel machining tolerances.

A backward derivation approach was traced for determining the machining tolerances starting from the last operation and computing machining allowances backwardly till the first machining operation (Ji 1996).

The main bottlenecks in the build process are related either to data quality or to machine tolerance and load.