Sentence examples for machining speed from inspiring English sources

The increase of machining speed generally requires higher cutting forces.

Three levels of depth of cut, machining speed, and tool rake angle are also considered.

As such, the group of cases C4, C8, and C9 can be used to investigate the machining speed effect since the only different parameter among the three cases is the machining speed.

The hydrogen storage properties of the chips are not affected by the machining speed adopted during mechanized filing.

In (ii), the color palette was created by tuning machining speed from 40 to 210 mm/s in increments of 5 mm/s.

ABC algorithm was then applied to find the optimal combination of process parameters with an objective of achieving maximum machining speed for a desired value of surface finish.

Figure 11 Evolution of cutting forces at the machining speeds of 25, 100, and 400 m/s.

In addition, it can be found that lower machining speeds reduce the maximum equivalent stress value.

However, the AlCrN coating exhibited superior machining behavior at higher cutting speeds indicating the suitability of the coating at elevated machining speeds.

It was found that micro-nano dimples of different sizes were successfully established under the same vibration frequency and different machining speeds.

Machining speeds up to 425 mm/s were demonstrated and trenches were produced from 10 to 200 μm wide depending on the laser method and beam size.