Sentence examples for machining error in from inspiring English sources

The authors have developed a prototype of a sophisticated 9-axis machine tool for bone cutting to reduce the machining error in cutting bone to accept artificial joint replacements and to improve the postoperative performance of the implants.

Interestingly, the exact cause of the 2014 explosion was never agreed upon, but Orbital ATK believed it was related to a machining error in the AJ-26 engines used on Antares.

Then, the final machining error in the nominal contact point c can be expressed as: delta =Scdot eapprox ecdot sin kern0.5em varphi (6).

Furthermore, the standard deviation of machining error in the z direction indicated that the iteration algorithm of error compensation has good robustness.  .

(3) Processing example showed that the maximum machining error in z direction reduced from 42 μm (uncompensated machining) to 9.5 μm (compensated machining) and the machining error is reduced by 77.4%%.

In an iterative process, machining error in any two successive iterations n and n−1 converges to the set error limit ε namely: Delta delta =left|{delta}_n-{delta}_{n-1}right|le varepsilon (7).

The actual cut depth in the next iteration is the actual cutting depth plus machining errors in the previous iteration, and recalculates the milling force, tool deformation, and machining errors.

Robotic machining error compensation in this way can therefore be thought of as a two-part problem involving acquiring quality scan data and processing it optimally to compensate a machining trajectory.

Investigation of the optical losses from the parabolic sides of the concentrator shows that, the imperfect parabolic surface caused by machining error results in scattering with a fraction of light escaping from the parabolic side instead of reflecting back to the receiver for all angles of incidence.

Poor maintenance of prior records, human error in recording and copying labels and machine errors in sequencing are all to blame.

The comparison of machining errors in the z direction at each sample point of compensation machining and no compensation machining is shown in Fig. 17.