Table 3 Geometry of the structure Midspan (m) Sidespan (m) Cable sag (m) Girder span (m) 1035 469 103 21 Hangers diameter (m) Cable diameter (m) Number of cables Girder inertia (m4) 0.064 0.586 2 34,117.
The US scanner manufacturer expressed concerns regarding the ability to transmit signals > 4 MHz along an 8 m length of cable to a system outside the magnet room due to the signal attenuation in the cable degrading the quality of clinical images.
The goals of the next generation HFC system are to efficiently utilize the precious last 100 m of the coaxial cable and to achieve a Gigabit transmission rate.
Warming was conducted for ∼6 months (late October 2012 mid-April 2012 mid-April 2013 temperature-controlled heating cable (producing maximum 83 with240
The major items are design philosophy, manufacturing method, and testing method of 500 m HTS cable with single core, 3 kA HTS conductor for power cable, 6.6 kV FCL using super normal transition, and 66 kV FCL using reactor and thyristor bridge circuit.
In the present ATLAS pixel detector, electrical signals between the pixel modules and the optical modules (opto-boards) are transmitted in ∼1 m of micro-twisted-pair cables.
Combined, the cables are 4432 m long; each cable consists of 67 to 230 twined cables, each with a 7 mm diameter.
Around 30 m of flexible low-loss coax cable (LMR-400 from Times Microwave Systems, Wallingford, CT, USA) were used to connect the receiver antenna with port 2 of the network analyzer.
This paper describes the design, manufacturing and installation of the 500 m HTS cable.
