Sentence examples for lowest mass flow from inspiring English sources

This can be attributed to the higher values of hourly measured irradiation on the 11th of April compared with the other days, and to the lowest mass flow rate of brine water.

Temperature measurements performed with thermocouples reveal that the LaB6 insert is moderately heated during the cathode operation (about 1600 °C at 19 A), except for the lowest mass flow rate.

In time-of-flight and cut-off techniques the highest average velocity of filtration is observed at the lowest mass flow rate in all experimental traces, while upon the flow rate increase it tends to an asymptotic value.

The handling of materials containing Am + Cm entails a significant increase of penetrating radiation sources (neutron and γ) whatever mixed reactor scenario is envisioned: The PWR and fast reactor scenario involving the recycling of Am + Cm in the form of targets results in the lowest mass flow.

The systems using the group A fluids have the lowest mass flow rates from 0.053 kg/s to 0.081 kg/s, the lowest required heat supplies from 31.64 kW to 34.61 kW, the highest ORC efficiencies from 5.95% to 7.29% and the CHP efficiencies from 71.83% to 72.32%.

In contrast, high water content in fuel composition is associated with low mass flow of ignition.

Moreover, vertical upward parallel tubes present positive flow response characteristic with low mass flow rate.

Frequently, the essential requirements for many electronic power devices are a small surface superheat and a low mass flow rate.

However, it is not affected by the pressure change at a low power and low mass flow rate.

The results show that the radial turbine is superior when the main concern is working with low mass flow rate.

A low mass flow rate causes higher temperatures in the receiver and thus bigger heat losses and lower storage tank temperatures.