Sentence examples for lowering of viscosity from inspiring English sources

In silicates, the addition of network-modifying alkali ions would raise the concentration of nonbridging oxygens, and the resulting lowered connectivity would lead to a lowering of viscosity.

The positive activation energy of shear flow indicates lowering of viscosity at higher temperature.

The change of intrinsic viscosities due to the effect of γ-irradiation may be explained through a combination of moderate degradation and chain scission and that was responsible for this lowering of viscosity at high radiation doses.

This will alter the particle-particle and particle-fluid interaction within the colloidal mixture that would lead to the modification of the momentum transfer and eventual lowering of viscosity.

The transesterification process of oils and fats is actually developed in order to obtain a noticeable lowering of viscosity in oils to employ the resulting product as biofuel in current existing diesel engines.

If Kumar and coworkers suggested mechanism of transient lowering of viscosity is correct, then this would explain a dominant role of reducing afterload on both right and left ventricles.

With the increase in production time, increasing fluid temperature causes lowering of oil viscosity.

In all four binary systems and for all shear rates, the addition of PET/0.6PHB to an EP results in a lowering of the melt viscosity, down to approximately 30% of the value for the respective pure EP.

This improvement in specific interlaminar shear strength was postulated to be due to the lowering of the resin viscosity over the duration of the cure, resulting in better wet through of fibres by resin and improved interfacial adhesion between fibre and matrix.

In the immiscible flooding process, the relatively high reservoir pressure results in the CO2 dissolution, oil viscosity reduction, lowering of interfacial tension, oil swelling and dissolved gas drive.

We further investigate the influence of Sout/Sint on the formation of phase-inverted (PIN) morphology, induced by lowering the viscosity of the disperse phase.