Sentence examples for lower scanning from inspiring English sources

In samples treated with lower scanning speeds, some small carbide particles appear in the interdendritic regions.

In any case lower scanning rates (more suitable for latent heat measurements) were used and the results were still considered accurate.

The most regular structures appear at acceleration voltages higher than 20 kV and areal dose ranges of 350 450 μC/cm2 with lower scanning speeds.

The results indicated that higher laser fluence along with smaller scanning interval and lower scanning speed was more beneficial for obtaining lotus-leaf-like hierarchical microstructures.

In addition to tracking methanol absorption and dimensional swelling, the time-dependent concentration profiles within the polymer disc were determined with higher resolution, lower scanning times, and no major geometry restrictions compared to previous state-of-the-art techniques.

AFM surface topography mapping of 10 × 10 µm to 625 × 625 nm areas on the surface of the lignin-gelatin film show that the film surface is smooth without clumping or aggregates of lignin and gelatin molecules; however, at the lower scanning areas of 1.25 × 1.25 µm some roughness was observed (Fig. 7).

This implies that lower scan rate can be more effective in fabricating oxide structures.

All devices present the higher capacitance at the lower scan rates.

Tip-induced wear was more extensive at higher applied load, lower scan rate and at higher scan line densities.

The redox waves are surface-controlled at lower scan rates and diffusion-controlled at higher scan rates.

The latter rate-dependent regime was reached at lower scan rates for thicker electrodes due to resistive losses across the electrode.