Sentence examples for lower etching from inspiring English sources

At lower etching temperatures (5°C to 15°C) as shown in Figure 3a, b, the etched SiGe nanostructures show a necklike body with a thin diameter underneath the truncated PS nanospheres.

A lower etching voltage, Vetch≈1.5 V, was necessary to sustain Jetch = 91 mA/cm2.

The lower etching aggressiveness and suboptimal properties may account for the low early (immediate) interfacial strengths reported for GFPs luted with self-adhesive cements [77].

At a lower etching temperature, both corrosion reaction and Au-assisted etching process were kinetically hindered, whereas at a higher temperature, Au-assisted anisotropic etching dominated the formation of SiGe NRs.

Assuming that the edges of the functional InGaAs membrane are aligned to the <110> direction of the substrate, the two faster under-etched edges will bond back to the substrate prior to the two edges with a lower etching rate.

At a lower etching temperature, both corrosion reaction and Au-assisted etching process were kinetically impeded, whereas at a higher temperature, Au-assisted anisotropic etching dominated the formation of SiGe NRs.

The peaks at 532 and 533.1 eV are come from adsorbates and their intensities become lower after etching.

The reason is due to the great reduction of Hα emission to lower the etching of sp 2 carbon phase, resulting from the increase of mean free path with decreasing pressure.

The reason is due to the increase of the mean free path for the excitation of plasma with decreasing pressure, resulting in a decreased amount of atomic hydrogen emission to greatly lower the etching of the sp 2 carbon phase during synthesis.

Most important are the constrictions, which can be produced by lowering the etching current, which will result in a decreased pore diameter.

Overall, the SBS was lower when self-etching primer was used than when phosphoric acid was used for enamel preparation before bonding in the three major groups.