Sentence examples for lower dissolution rate from inspiring English sources

In addition, compared to pure HA coatings, the FHA/ZrO2 composite coatings show higher bonding strength, lower dissolution rate and comparable in vitro bioactivity.

It was suggested that the outer layer with the higher dissolution rate contains electrolyte anions and the inner layer with the lower dissolution rate consists of pure alumina.

Furthermore, the glycerol-containing particles had a significantly lower dissolution rate (7.8% ± 2.1%, over 180 min) compared to the glycerol-free particles (58.0% ± 2.9%, over 60 min) when measured using a Franz diffusion cell.

However, in another scenario (Figure 3b), if the dissolution rate of one reactant is higher than the other, the reactant with a higher dissolution rate would be dissolved into the molten salt first and then the dissolved reactant would coat on the reactant with a lower dissolution rate, as shown in situation B, rather than diffuse homogeneously into the reactant.

The electrodeposited coating under these conditions shows a shift in the corrosion potential towards nobler values due to the Mn incorporation in the alloy, and has sacrificial properties that show lower dissolution rates than Zn when galvanic coupled with steel with an area ratio of 1 1.

Phosphate glasses while not being used industrially have much lower dissolution rates than borosilicate glasses, which make them a more favorable option.

Cocrystals can provide higher and lower dissolution rates compared to the API.

Although the selected LSS for preparation of tablets exhibited the lower drug dissolution rate in pH 1.2, yet they showed bad flow properties.

Soils on coarse parent material may have slightly lower carbonate dissolution rates in the order of approximately 1.7 2.2 mol m−2 year−1 (normalised to a 1000 mm output), while other sites with smaller grain sizes had slightly higher dissolution rates (2.2 3.0 mol m−2 year−1).

Compared with calcium carbonate, HAP has much lower solubility and dissolution rate and therefore much higher resistance to acid attack.

But differences also appear, like higher field strength across the barrier layer and much lower pore wall dissolution rate in oxalate solutions.