Sentence examples for low wetting from inspiring English sources
Thermo-osmotic effects also assisted to explain the apparent low wetting observed in the hydration of a clayey barrier material.
In a previous publication it was shown for a low tilt angle of 30° that for resource efficient cleaning a low wetting rate is suitable.
This method is useful to measure imbibition relative permeability curves, especially in low permeability rocks at relatively low wetting phase saturations.
Al-based complex metallic alloys (CMAs) are crystalline intermetallic phases characterised by very complex crystal lattices, showing intriguing surface properties such as low wetting, low friction and hardness which include, for the Al Cr Fe system, high corrosion resistance.
The difference between thermal expansion coefficient of the metallic and ceramic phase, oxidation of the chromium phase, low wetting of alumina by chromium phase and a coarser structure are the principle responsible for decreasing of properties in higher value of x and high sintering temperature.
These results can be understood in terms of low wetting at the silver/SiC interface, which can be a consequence of a higher contact angle and a reduction in the contact area promoted by the gas evolved in the oxidation of SiC (mainly CO2 as indicated by mass spectrometry).
"In the woods to the west he noticed an odd glow coming through the trees, something yellow, something out of the low wet ground, a mist, a vapor, something that might be magical.
Fruit-bearing trees and certain roots are used for food, as are the leaves of the lca-wa, khumag, and sre-ral, all of which grow in the low, wet regions.
The adhesion coefficient decreases abruptly and wheel slip emerges because of the rail conditions change from "dry to wet," "dry to low" and "wet to low" at t = 10 s and from "wet to low," "wet to very low" and "low to very low" at t = 20 s, respectively.
The CNT CF membrane exhibits superhydrophobic behavior (water contact angle: 165°), low wetted surface fraction (5.5%), and low work of adhesion (Wad: 2.5 mJ/m2.5
