Sentence examples for low surface resistivity from inspiring English sources
Thus, depending on the coating composition, thin and flexible textile coatings were achieved with comparably low surface resistivity.
ITO films, thus deposited on polyimide substrate at higher deposition temperature, have larger grain sizes, a high surface roughness and a low surface resistivity.
The obtained graphene films exhibit reasonably low surface resistivity of 5 kohms/Square at 60% transmittance at 550 nm that can be largely improved by thermal treatment.
The ultra-light aerogel fabricated in this work exhibited low density of 4.0 mg/cm3, low surface resistivity of 6.6 Ω/sq, high specific area of 1069 m2/g, and high recoverable strain of 94% in compression.
The graphene coating layer is highly thermally conductive and a ~ 45 nm thick coating layer on silicon wafer could serve as a highly efficient heating film because of its high electrical conductivity of 1.98 × 104 S/m and low surface resistivity of 20.4 Ω.
Elaborated polymeric graded materials may be applied in many industrial fields where products with low surface electrical resistivity on one surface and high electrical resistivity in the rest of the volume are needed.
The films exhibited high thermal stability, solvent-adsorption, and low surface electronic resistivity.
The major ingredients of the blend composition are optimized to achieve the lowest level of the surface resistivity for modern smart textile applications.
The as-prepared PET-Ag fibers have good electrical conductivity, with surface resistivity as low as 0.4 mΩ cm.
In this chapter, the authors attempt to identify via a 2i factorial design of experiment the interactions between injection parameters, volume resistivity, surface resistivity and surface finish, using a low viscosity polycarbonate (melt flow index, MFI, 38 g/10 min) and then verify the interactions in more detail using a higher viscosity polycarbonate (MFI 20 g/10 min).
Chloride ion permeability classification Surface resistivity test 28 day test Kohm-cm High <12 Moderate 12 21 Low 21 37 Very low 37 254 Negligible >254 Open image in new window Fig. 2 Relationship between surface and bulk resistivity for fly ash mixtures.
