Sentence examples for low source from inspiring English sources
Boatmen must guide their craft carefully while the water is low Source: All images by Tom Felix Joehnk A spur on the west bank of the Jamuna, at Enayetpur.
Low source nodes contribute to decrease in computing time of collision detection.
Recent development of SQUID picovoltmeters shows excellent noise performance, especially for sensors with low source impedances.
For experimental designs with longer block lengths, the MIR is limited by the low source information transmission rate.
At low source density, where the behavior is multiplication controlled, tension/compression asymmetry is often realized and the scatter increases with decreasing specimen size.
The efficiency of the detectors is higher at low source energies (absorption coefficient is very high) and decreases as the energy increases (fall off in the absorption coefficient), because the photoelectricity is dominant below 100 keV, which means in other words that it is higher for the bigger detector or low source distance than the smaller one or higher source distance.
SWCNT/BNT/HfO2-FeFET and SWCNT/BNT-FeFET show the typical p-channel transistor characteristics and saturated source-drain currents at low source-drain voltage.
A problem of vertical devices with channel length down to 100 nm is the breakdown, which already takes place at very low source-drain voltages.
This is because, in most cases, the accompanying X-ray was soft enough to be absorbed completely before entering the detector and also the angular correlation effects can be negligible for the low source-to-detector distance.
We measured the drain current-gate voltage (I D -V G ) characteristics of SOI-FETs at low temperatures (approximately 15 K) and low source-drain biases (V D = 5-10 mV).
Theoretical approximations, for InAsSb NWs, the band structure proposed show a valence band off-set of about 495 meV with a band gap of 270 meV [161], while the experimental observations in this off-set of energy is quite different, which is impossible to measure due to transport mechanism at low source-drain bias.
