Sentence examples for low power plasma from inspiring English sources

Alumina coatings were prepared by low power plasma thermal spraying (2.5 4.0 kW).

Conventional (micron size) WC 12Co coatings were sprayed on stainless steel substrate with low power plasma spraying process.

Al Cu Cr quasicrystalline coatings were prepared by low power plasma spraying with axially-fed powder systerm.

The deposition of zinc oxide (ZnO) as a window layer in CuInGa(S,Se 2 (CIGS) thin film solar cells was studied in a low power plasma reactor.

The plasma torch was designed such that the powder can be sprayed at low power plasma (3.9 9.1 kW) and internally injected by carrier gas in the region between the anode and cathode.

In this study, three kinds of WC powders with different metal binders (Co, NiCr and CoCr) were sprayed by low power plasma spray system on Al Si Cu alloy substrate.

Particular attention is given to the recent advances in ICP MS detection including: GC-ICP interface designs; low power plasmas; and alternative mass analyzers (time-of-flight, double-focussing single collector, double-focussing and collision cell single-focussing multicollectors).

Cr/Al2O3 coatings were deposited by low-power plasma spray process with dry-crushed powders.

NiCrAlY/Al2O3 composite coatings were prepared using the low power atmospheric plasma spraying technique.

The contrast experiments were performed by low power atmospheric plasma spray (LPAPS) using the same Al65Cu20Cr15 QC powders, and by HVOF spraying Cu180 powders with the size of 44 61 μm.

The coaxial design allowed operation with very low power density plasmas (0.18 W/cm3) and a much larger plasma size (13 mm) than the parallel plate designs.