Sentence examples for low loss region from inspiring English sources

Furthermore, the strut thickness and the material refractive index determine the frequencies and the bandwidths of the low loss region.

Low loss region EELS spectra acquired within these intergrain zones have been compared to reference spectra acquired in the same experimental conditions on well known compounds.

With the decrease of the strut thickness and material refractive index, the low loss region will be shifted toward the higher frequency, and the widths of low loss regions will be broadened.

Although the coating thickness of COP was estimated as 0.32 μm, slightly smaller than that shown in Fig. 1, the low loss region covered the black-body radiation of body temperature shown in Fig. 1.

The spectra were quantitatively analyzed in the low-loss region, i.e. energy loss ≤50 eV, by fitting a sum of two Lorentz functions begin{aligned} S (E =L_1(E)&+L_2(E + O end{aligned (1)with begin{aligned} L_i(E)&= frac{2A_i}{pi } frac{w_i}{4 left( E-E_iright) ^2+w_i^2}, quad (i=1 withnd{aligned} (2)to the deconvoluted spectra.

1D spectrum images of the low-loss region were obtained from the metal oxide interface region using an aberration-corrected Nion UltraSTEM 100 operated at 100 kV and equipped with a Gatan Enfina spectrometer.

Lyngso, J. K., Mangan, B. J., Jakobsen, C. & Roberts, P. J. 7-cell core hollow-core photonic crystal fibers with low loss in the spectral region around 2 µm.

The structure of waveguide was designed to propagate a normal single mode at the input and output regions for low loss beam coupling and propagation.

We have recently proposed a class of very low loss MOMS devices working in the 100 kHz frequency region, based on two-side MEMS processing bulk-micromachining.

It is demonstrated that a thin ITO layer and a coupled MQW active region are essential to achieve a low loss and high Q-value cavity.

Cardenas, J. et al. Low loss etchless silicon photonic waveguides.