Sentence examples for low coating from inspiring English sources
The results obtained indicate that, in the case of coatings with BN(h) content higher than 11 vol.%, the wear mechanism is a mild adhesive wear mechanism (adhesive ploughing) with high plastic strain of the coatings and low coating transfer to the ball.
Due to the lamella structure of the coating and the lack of metallurgical bonding, thermal sprayed coatings may have disadvantages such as low coating cohesive strength and low interface strength between the substrate and coating.
Compared with Zn ferrite, Zn ferrite/MWCNTs composite showed low addition amount, low coating thickness, and enhanced EM-wave absorption performance.
The experimental results and numerical simulations suggest that coating damage is commonly caused by low coating strength, high contact pressure, and poor lubrication.
High deposition efficiency with low coating porosity level was obtained by decreasing the standoff distance and preheating the feedstock powder.
It was suggested that incorporation of Si hindered temperature induced bulk graphitization (due to suppression of sp2 bond formation) of the coating and thus accounted for the low coating wear.
The DJ system led to the lowest coating porosities after thermal treatment as well as to the lowest oxidation rates.
The lowest coating wear coefficient with 1.93×10−16 m2/N was obtained for Al2O3 balls at room temperature, whereas for temperatures exceeding 200 °C increased abrasion of the coating takes place, resulting in higher wear rates.
The lowest coating efficiency was obtained at a low air temperature and high flow rate (test 1; Table 6); this occurred because the air temperature was not sufficient to evaporate the solvent adhered to the pellets, which increased the agglomerate fraction.
An insulated stick built glass fin curtainwall with low-iron glass and low-e coating optimizes energy and allows for maximum transparency.
One mouse with the lowest coat-color chimerism failed to develop a tumor after 375 days, possibly reflecting insufficient contribution of GEMM-ESCs to lung epithelium for reliable use in experimental cohorts (Fig 4B).
