Sentence examples for longitudinal diameter from inspiring English sources

The maximum longitudinal diameter of all palatal rugae was measured from the point of its origin till the termination using the Vernier caliper (0.02 mm).

The greatest longitudinal diameter (length) and the greatest transverse diameter (width) of the tumor were measured using a vernier caliper, and the tumor volume was calculated using length × width2 × 0.5.

The electron micrograph of the starting weak-magnetic spindle-like hematite NPs are shown in Figure 3a, which have longitudinal diameter in the range from 120 to 150 nm and transverse diameter (short axis) around 40 nm.

Patients in the DCM group also presented with only slightly increased right ventricular longitudinal diameter as compared to the AS and control groups, with similar right ventricular transversal diameters.

If the growth plate is perforated perpendicularly during tunnel drilling, the drill injury is round and its size can be deducted from the following formula (Figure 5a and b): Figure 5 a: The inclination of a round drill leads to an elliptic drill injury (a = drill diameter; z = longitudinal diameter of drill injury proportional to the drill inclination).

With the same image, the widest anterior-posterior diameter (APD) of the uterus was measured from the outer margins of the anterior surface to the posterior surface perpendicular to the longitudinal diameter.

Transverse and longitudinal diameters of the lesions were measured daily, using a digital caliper, and monitored through photography.

Dong et al. [ 28] measured the transverse diameter and longitudinal diameters of the lateral mass of C1 were 17.90 ± 1.18 mm and 15.63 ± 1.04 mm, respectively.

Three orientations of PCL fibers–(1) aligned longitudinal (fiber diameter: 811 ± 388 nm, Fig. 1D), (2) aligned transverse (diameter: 772 ± 408 nm, Fig. 1E), and (3) random (diameter: 1562 ± 524 nm, Fig. 1F were successfully prepared by electrospinning.

Their behaviour has been evaluated on the basis of several parameters, namely: the in-section arrangement of hoops, the effective confinement ratio, the spacing of hoops normalized to the longitudinal bar diameter, etc.

Longitudinal rebar diameter.