Sentence examples for loading set up from inspiring English sources

In a series of iterative design analysis fabrication testing cycles, 2.9 m long I-beams that used the current practice joint and the novel proposed joint were designed, studied theoretically with the use of a 3D Mosaic analysis tool, then manufactured and loaded to failure in a cantilever flexure loading set up.

River loading sets up the conditions for a longitudinal gradient along the bay.

Edinburgh captain Andries Strauss was thwarted by Darragh Fanning before Tom Denton's off-load set up Marshall in the 64th minute after Isaac Boss's break.

While Davies cut the margin to 12-10 before the break, the home side looked on course for a bonus-point win when Sweetnam's superb break and off-load set up Copeland to score.

Sinfield's penalty saw the visitors take an 8-6 lead, before Luke Robinson's off-load set up Wardle for a one-handed try in the corner to put Huddersfield ahead for the first time, with Brough adding the extras.

The loop is designed to be stable with wide range of load impedances, with full load set up to R L =250 Ω and C L =50 p F. The maximum load corresponds to the maximum current drawn from VPW R, which is designed to be IPWR(max)=4 mA, which is far above the needs of our implantable telemetry electronics.

The Leinster try was also laced with controversy as Ulster wing Tommy Bowe appeared to be caught in mid-air before he lost possession as the play was finished off with Brian O'Driscoll's trademark off-load setting up Jennings to score.

Michael Soucy bunted the bases loaded to set up a five-run inning for the Saints, who took the lead on a hit by pitch and added runs on Dusty Sanderson's sacrifice fly, Saatzer's single to right field and back-to-back run-scoring singles by Kevin Swick and Josh Goosen-Brown.

Secondly, a supplementary model for load balancing is set up for a better load distribution solution on feeders and transformers at TSC loading.

The method enables the equations for the propagation constants and for the response to convected loading to be set up with much greater facility than by earlier methods.

Beam theory calculation is able to predict the static stresses induced by the ISO 7206/4 loading set-up with a difference always lower than 20% with respect to a prediction of a simplified FEA.