Sentence examples for loading result from inspiring English sources

A common rule is that both sustained and repeated loading result in a reduction of the tension stiffening contribution.

On the other hand, the biphasic behaviors under tensile mechanical loading result in a range from a minimum of 5.42±1.05 MPa to a maximum of 12.00±1.96 MPa for the PEKK PCL scaffolds, and 10.19±4.49 MPa to 22.60±2.44 MPa for the gelatin-PCL scaffolds.

It was observed that the DIC technique could provide very accurate and detailed information, which is not possible to obtain using conventional techniques, including the in-plane and out-of-plane strains and their spatial variations, and the locations of high tensile and compressive strains which at later stages of loading result in cracking or crushing of concrete.

Slight adjustments of the actuator settings were then made to dial in the expected loading result.

Table 2 shows the CFA loading results ranging from 0.68 to 0.89 (or moderate to high CFA loadings).

However, increasing Fe loading resulted in decreasing catalytic stability.

Activated carbon or mesoporous carbon arising from these methods suffer either from low surface area or high oxygen loading, resulting in a bad conductivity of the materials.

Consequently, non-proportional loading resulted in many cracks.

Previous studies also outlined that unconfined mechanical loading results in more homogenous mechanical signals throughout the tissue-engineered construct when compared to confined loading scenarios, in which substantial pressure and deformation gradients exist close to the porous indenter47.

While, higher adsorbent loading resulted in an increase in removal efficiency.

In addition, 40 wt% kenaf fiber loading resulted in higher mechanical properties.