Sentence examples for loading load from inspiring English sources
Figure 23 shows the comparison for four gauges in the case of perpendicular loading (Load Case IA): two located in a compression-loaded main member, and two in a tensile-loaded main member.
The loading load door of these arenas became known as "the elephant door," a term that is still used today, said to Harold Bannon, executive director of the $52 million Arena at Harbor Yard.
The peak load resisted for perpendicular loading (Load Case IA) was 10,628 N at a maximum deflection of 107 mm, and for diagonal loading (Load Case IB) it was 13,648 N with a maximum deflection of 149.2 mm.
A 1-way analysis of variance was used to determine the statistical difference in displacement at cyclic loading, load to clinical failure, and ultimate failure load between each knot configuration.
For each knot configuration, 10 knots were tested for displacement at cyclic loading, load to clinical failure (3-mm displacement), ultimate failure load, and mode of failure on the servo-hydraulic material testing system (MTS 858 MiniBionix test system; MTS, Minneapolis, MN).
Fig. 5 Scheme of the applied vertical sinusoidal force loading (load-controlled) (Maas et al. 2013).
A yield surface in the V – M - H (Vertical, Moment and Horizontal loading) load-space defines the yield and failure envelopes.
Drug loading, loading efficacy and release kinetics were determined.
Loading: Loading in is the next step.
The capacitor sizes and charge times for the four loads (Load 1, Load 2A, Load 2B, and Load 2C) when each is considered in isolation are tabulated in Table 3. Table 3 Load table Draw length ( s) Capacitor size ( uF) Charge time ( s) Load 1 0.26 2,000 29.18 Load 2A 0.63 5,000 70.7 Load 2B 1.02 8,000 114.5 Load 2C 1.42 11,000 157.
To compare activations between experimental conditions, linear contrasts were performed using t-statistics [attentional demand: (load 1/DS + load 3/DS + load 5/DS)−(load 1/ES + load 3/ES + load 5/ES); WM load: (load 5/ES + load 5/DS)−(load 1/ES + load 1/DS); interaction effect: (load 5/ES−load 1/ES)−(load 5/DS−load/1DS)].
