Sentence examples for loading in the initial from inspiring English sources

The cell size ranging from 45 to 176 μm could be modulated by changing solid loading in the initial slurry and freezing temperatures.

The increase in the hydrophobicity of the Ar + H2 plasma-treated PCL film resulted in a lower cell loading in the initial step of cell culture as well as a decrease in the level of cell attachment and proliferation compared with the pristine film.

Drobnic and colleagues have shown that the transosseous fixation technique provides excellent stability of the polymer-based graft with high endpoint fixation strength and no detachment after continuous passive motion with loading in the initial postoperative period [ 39].

And if physicists ever succeed in building a general-purpose quantum computer which would use "qubits" that can be set to 0, 1, or both 0 and 1 to do certain calculations that overwhelm a conventional computer then such a quantum network might enable users to load in the computer's initial settings from remote terminals.

Because the losses of critical loads become more severe as the duration of the interruption increases, the extra power supplied by wind farms is crucial for critical loads in the initial stage of system restoration.

Confirmation of infection by culture without immunologic response is rare, although the high sensitivity of the mycobacteria growth indicator tube system could detect a low bacterial load in the initial stages of infection.

Compared with the system restoration without wind farms, the system restoration with wind farms picks up more loads, especially in the initial stage of system restoration.

Compared with older children and adults [ 1], acute infection in babies is characterized by a sustained high-level plasma viral load (pVL) in the initial years of infection [ 2, 3] and a high risk of rapid progression to AIDS and death [ 4].

TF D M P.P was similar in the yield load but higher in the initial cracking load compared to the solid slab.

In most situations, strengthening is required when there is an increase in the applied load, human error in the initial construction, a legal requirement to comply with updated versions of existing codes, or as a result of the loss of strength due to deterioration over time.

For laden workers carrying small loads as observed in the initial phase at 15°C, both the time needed to cut a grass of 0.68 mm width (Fig. 3B), and to lift-up the resulting fragment of 7 mm length (Fig. 3A) should be added, resulting in a returning time of 28 min 35 s.