Sentence examples for loading in excess from inspiring English sources

At high Ba loading in excess of that required for a full monolayer 'coating' (>8 wt.% BaO), small (∼5 nm) particles of 'bulk' BaO are present on top of the one ML BaO/Al2O3 surface.

This LHP generated a heat load in excess of 140 W with a total thermal resistance of 0.39 °C/W.

In order to interpret the results, the high factor load in excess of 0.75 and mean factor load between 0.4 and 0.75 were considered which were optional values (Childs 1970).

The data showed that this relatively weak material can be used, without internal reinforcement, to print a floor that is able to support loads in excess of typical design code levels.

The data indicate that these deposited PTMS layers remain electrically insulating under effective electrical fields in excess of 6 MV m−1 and under effective point loads in excess of 3 GPa.

Stream loads in excess of annual Hg atmospheric deposition (ratio > 1) were observed in watersheds containing Hg mines and in relatively small and medium-sized watersheds with gold or silver mines, however, larger watersheds containing gold or silver mines, some of which also contain large dams that trap sediment, were sometimes associated with lower load ratios (< 0.2).

HKPs are highly abundant in lysates and have typically saturated the membrane for samples loaded in excess of about 4  μ g per lane (see previous section).

Twenty-four hours after intratracheal S. pneumoniae challenge, resulting lung bacterial loads in the absence of low pH injury were 5.8 × 10 ± 2.9 × 10 cfu versus 8.4 × 10 ± 3.1 × 10 cfu in the presence of low pH injury, demonstrating a profound increase in total S. pneumoniae load, in excess of the starting inoculum.

Experiments using simulated gastric and intestinal fluids evidenced significant pH-dependent drug release behaviour of the nanoformulations loaded with Rhodamine B (RhB) as a model drug (loading capacity in excess of 83%), as monitored by UV Vis.

In all of the above studies, LβX, LαGl and LArb loading was in excess.

The predicted results for the surcharge load well in excess of the test load indicated that the surcharge load-induced reinforcement strains exponentially decrease with depth, showing a good agreement in qualitative terms with that assumed in the FHWA design guideline.