Sentence examples for loading conducted from inspiring English sources

Mechanical properties and deformation characteristics of the constructs were evaluated under uniaxial compression loading conducted at 37 °C in culture media with an integrated camera.

The corresponding measurements are processed through the proposed algorithm as illustrated in section 3. Further, case studies of power system contingencies (power swing and load encroachment with and without faults and unbalanced loading) conducted on IEEE-14 bus system are given in Table 4.

Kinetic analysis of hemin loading conducted via stopped-flow UV vis and rapid-freeze-quench resonance Raman shows that both mutants load hemin with biphasic kinetic parameters that are not significantly dissimilar from those previously observed for wild-type HasAp.

Proof loading at levels above the design limit load, conducted before the peening operation, substantially increases the crack initiation life of conventionally shot peened specimens.

Tests with load, conducted using aluminum vessels containing a certain amount of water, were accomplished with both standard vessels and black ones, and with one or two vessels.

Building information models (BIMs) are created for each scenario via Autodesk Revit®, and are used for the calculation of the total energy load conducted by Autodesk Green Building Studio®.

This paper summarizes measured versus computed results from a field test with heavy live load conducted on a multi-span, horizontally curved composite steel I-girder bridge in Duluth, Minnesota.

Part of this screening is an oral glucose tolerance test with a 75 g oral glucose load conducted according to standards of the World Health Organization [ 5].

A comparative study on high strength concrete discs reinforced with steel fibers under monotonic loading and cyclic loading was conducted in this contribution.

Simulations of the response of a wall strip subjected to blast loading, fragment loading, and combined blast and fragment loading were conducted and the results were compared.

Lateral buckling tests based on a quarter point loading were conducted using a special test rig designed to simulate the required simply supported and loading conditions accurately.