Sentence examples for load length from inspiring English sources

It was found that for a certain load length, the load resistance at the frequency points of one-quarter wavelength of odd multiples results in peaks and in the maximum error for source impedance identification.

The review of literature shows that the strength of longitudinal shear bond achieved depends on many factors, among which include the shape of steel deck profile, type and frequency of embossments, thickness of steel decking, arrangement of load, length of shear span, slenderness of the slab, and type of end anchorage.

The control settings reflected the usual stroke care in The Netherlands at the time (e.g. concerning case load, length of stay and extent of illness).

Furthermore, the influence factors such as loads, length and flexural rigidity of geocell reinforcement, coefficient of subgrade reaction and the interface resistance on the stress-deformation characteristic of geocell reinforcement are discussed.

In the processing of fir trees, the method of loading length is used where assortment lengths (4 to 12 m) are adjusted to the means of secondary wood transport.

In the current study experimental research program is executed on 8 large scale test specimens having different longitudinal stiffener configurations and loading lengths to extend the available background and to verify advanced numerical model.

Scaling equations are extracted that predict load, crack length, damage zone length and mode-mix.

This is because crack deceleration is influenced by many parameters: cyclic load, crack length, distance to obstacles, orientations of grains and obstacles.

Open image in new window Fig. 9 Load-bearing length and load-amplification factor depending on the embedment depth and diameter of anchor based on the elastic analysis.

The first component (48.9% of the variance) included two variables with positive loadings: bill length (loading = 0.88) and culmen length (loading = 0.87).

The effective bond lengths can be assumed to be 100 mm at least from the consideration of load transfer length at 97 % of the maximum load.