Sentence examples for liner specimens from inspiring English sources

Composite liner specimens consisted of a textured geomembrane (GM) underlain by a needle-punched geosynthetic clay liner (GCL) which in turn underlain by a compacted silty clay.

The results show that the present method can educe the imposed impedance with a good accuracy when the liner specimens are subjected to the sound field composing of multiple incident modes including several transverse modes in both ducts.

The diaper liner with specimen will be placed in the collection bag and refrigerated.

Briefly, in both superior and inferior regions of the retrieved liners, small punch specimens were sampled near the surface (0 0.5 mm) and below the surface (1.5 2 mm).

Two ceramic tubular liners and a perforated liner are tested as specimens, whose impedance values to be educed are known a priori by means of existing impedance models.

Thus, for each liner, at least four specimens were tested (depending on material availability), which led to a total of 889 small punch tests performed on the 185 retrievals.

Before the test was started all UHMWPE-liners were conditioned by storing the specimens in the lubricant until there was no further increase in weight.

Two cylindrical specimens were produced from each liner using a 9 mm diameter core punch.

By performing standard consolidation tests on both undisturbed specimens (as recovered from the original core liner after hydrate dissociation) and remolded specimens, stress-dependent mechanical and hydraulic properties (e.g., compressibility and hydraulic conductivity) were measured.

This difference might be attributable to a number of factors, such as differences in the material properties, the geometry of the specimens, the clearance between the ball and liner, and the bonding condition assumed between the metal shell and the liners.

The specimens include manufacturing influences of the future used liner.